FUEL SYSTEM, INJECTOR CONTROL SYSTEM PRESSURE TOO LOW
The pressure in the injector control system is below the expected range.
Heads up: this code wasn't in our hand-written library yet, so DiagCoach AI built this page on the fly. Double-check critical specs against service info before condemning parts.
What it means (plain English)
The computer is seeing that the pressure for the fuel injection is not high enough to properly inject fuel, which can lead to rough engine performance.
What the computer is actually seeing
The engine control module (ECM) monitors the injector control pressure, ideally between 600 to 1100 PSI during operation.
What a healthy reading looks like
The expected fuel injector control pressure is typically between 600 and 1100 PSI.
Guided diagnostic — the DiagCoach way
Don't just throw parts at it. Walk through these in order — each step tells you whether to keep going or stop and fix what you found.
- 11. Inspect the wiring and connectors of the injector control pressure sensor for damage or corrosion. If damaged, repair or replace as needed. Decision: Are the connections secure? If yes, proceed to next step. If no, fix and retest.
Common causes
- Clogged fuel filter
- Faulty fuel pump
- Leaking fuel lines
- Damaged pressure sensor
- Wiring issues to the pressure sensor
Typical repair cost
$$$
Related codes
Frequently asked questions
Is it safe to drive with this code?
It might be drivable, but expect reduced engine performance. Fix soon.
Will this code come back if I reset it?
Yes, if the underlying issue isn't fixed, the code will likely reappear.
Why does this code appear alongside other codes?
It may be related to fuel supply issues affecting multiple systems.
Working a real vehicle right now?
Let DiagCoach walk you through it live with your specific symptoms, vehicle, and what you've already checked.
Start guided diagnostic →